Commercial Mixer Repairs Perth

Electeq carries out commercial mixer repairs Perth bakeries, cafes, restaurants and food producers rely on. A licensed electrician finds the failed part, repairs it on site and gets your mixer back into production.

Mixers we repair

A mixer is often the machine a kitchen cannot work without. When it stops, dough, batter and prep stop with it. Electeq repairs:

  • Planetary mixers, from benchtop units to floor-standing models
  • Spiral dough mixers used in bakeries and pizza kitchens
  • Hobart mixers, old and new
  • Other major commercial brands used in Perth kitchens
  • The switches, plugs, leads and circuits that supply the mixer

Older machines are welcome. Many heavy-duty mixers are built to last for decades, and a repair is often the better choice than a new machine.

Common mixer faults

Most mixer breakdowns come down to a small number of parts. Electeq tests each one to find the real cause before replacing anything:

  • Mixer will not start: a failed switch, contactor, start capacitor or motor winding
  • Bowl guard or bowl lift interlock not closing, so the safety circuit stops the motor
  • Speed selection faults or the mixer stopping under load
  • Motor overheating, tripping the circuit breaker or the RCD
  • Damaged leads and plugs from daily cleaning and movement

Component-level repairs, on site

Electeq traces the fault to the exact component that has failed, then repairs or replaces that part. Repairs are carried out on site where possible, so a heavy floor mixer does not have to leave your kitchen. Every repair is tested before the job is signed off, and all electrical work complies with AS/NZS 3000.

Electeq was established in 2021, and its founder brings more than 35 years of electrical engineering experience, including 12+ years specialising in commercial catering equipment. Electeq is a licensed WA electrical contractor (EC15007), was a NECA Small Business Awards State Finalist in 2023 and received an Avetta Safety Star in 2025.

Fast help across Perth

Same-day service is available for urgent breakdowns, and Electeq is open 24 hours, 7 days a week. The team is based at 55 Carosa Rd, Ashby, and travels to bakeries, cafes, restaurants, clubs and food production sites in every Perth metro suburb, including Joondalup, Wanneroo, Osborne Park, Malaga, Wangara, the Perth CBD, Midland, Fremantle and Rockingham.

Commercial mixer repairs Perth: common questions

Who repairs commercial mixers in Perth?

Electeq, a licensed WA electrical contractor (EC15007) based in Ashby, repairs commercial mixers on site across the Perth metro area. Phone 0448 865 399.

Do you repair Hobart mixers?

Yes. Electeq repairs Hobart mixers along with Hobart dishwashers, slicers and food processors, and other major commercial mixer brands.

My mixer hums but will not turn. What is wrong?

A humming motor that will not turn usually points to a failed start capacitor, a seized motor or a fault in the drive. Switch it off and isolate it, as running it in that state can burn out the motor. Electeq can test it and tell you which part has failed.

Can you repair an old mixer?

Often, yes. Many older heavy-duty mixers are worth repairing, and parts can usually be sourced or repaired. Electeq will tell you honestly if a repair is not worth it.

Can commercial equipment be repaired instead of replaced?

Often, yes. Most breakdowns come from one failed component such as a heating element, pump, motor, sensor or control board. Electeq traces the fault to that component and repairs or replaces it, and only recommends replacing the machine when a repair would not be cost-effective.

Mixer stopped mid prep?

Call for same-day help anywhere in the Perth metro area.